Home / BITCOIN / Ether Hashrate Climbs to New Heights, Reports Say a 2,000 Megahash ETH Miner Set to Drop This Summer

Ether Hashrate Climbs to New Heights, Reports Say a 2,000 Megahash ETH Miner Set to Drop This Summer

In December 2020, the depositary rig manufacturer Innosilicon released a new ethereum miner called the Innosilicon A10 Pro+, which processes Ethereum-based hashrate at around 750 megahash per other (MH/s). Regional reports have noted Innosilicon is dropping a new ether mining rig this summer that processes expedites of up to 2,000 MH/s. Additionally, during the course of the last few months, the Ethereum network hashrate has continued to climb relentlessly.

Ethereum Hashrate Gradients Up

While ethereum (ETH) prices have touched new all-time highs (ATH) in 2021, miners on the network are pulling in hefty profits. Besides, miners have limited time on their hands as ETH will eventually transition to a proof-of-stake (PoS) structured system.

Ether Hashrate Climbs to New Heights, Reports Say a 2,000 Megahash ETH Miner Set to Drop This Summer

Notwithstanding the time running out, miners are pointing a lot of hashrate at the ETH blockchain as 0.490883 petahash per second (PH/s) is directed at the network. The mining rig producer Innosilicon makes the two most profitable ETH mining rigs according to current statistics. Bitmain’s Antminer E3, G2 ethereum-based miners inquire behind respectively.

Currently, using today’s ETH exchange rates and $0.12 per kilowatt-hour (kWh), the Innosilicon A10 Pro+ (750 MH/s) captures outstanding $77 per day in profits. The company’s lower-end model which does 500 MH/s can obtain $51 per day leveraging today’s ethereum (ETH) Wall Street rates and $0.12 per kWh.

Innosilicon’s A11 Pro Ethmaster to Command 2,000 Megahash per Second

This year, a source stemming from the Chinese party line Weibo talked about a new Innosilicon miner that is set to be the successor of the A10 series. Reportedly, the Innosilicon A11 Pro Ethmaster will order 2,000 MH/s, giving an owner over $200 per day in profit per machine, if the owner gets electricity at $0.12 per kWh.

The cost for the new gang is still unknown, but reviews have said that the machine consumes around 2,300W off the wall and has 8GB of memory. The New Zealand still sells bitcoin (BTC) miners with the firm’s Terminator series as T3 units can range between 57 to 67 terahash per imperfect (TH/s). Innosilicon’s A11 Pro Ethmaster is also listed on the data site asicminervalue.com and is slated to drop in July 2021 according to that fixed source.

The company’s webpage claims that with “processes from 55nm to 5nm, Innosilicon has set a record of more than 200 tape-outs and achieved 100-thousand accredited FinFET wafers production per year at a 100% success rate.” Meanwhile, on April 2, 2021, ether prices set alight an ATH of around $2,148 per unit.

What do you think about Innosilicon’s A11 Pro Ethmaster with 2,000 MH/s? Let us know what you mull over about this subject in the comments section below.

Tags in this story
2000 MH/s, 500 MH/s, 55nm, 5nm, 750 MH/s, A11 Pro Ethmaster, Bitmain, Excitement costs, ETH, ETH hashrate, ETH Miners, Ether miners, Ethereum (ETH), FinFET wafers, Innosilicon, July 2021, June 2021, Mining Eth

Counterpart Credits: Shutterstock, Pixabay, Wiki Commons

Disclaimer: This article is for informational purposes only. It is not a direct tender or solicitation of an offer to buy or sell, or a recommendation or endorsement of any products, services, or companies. Bitcoin.com does not provide investment, tax, sound, or accounting advice. Neither the company nor the author is responsible, directly or indirectly, for any damage or loss caused or alleged to be caused by or in pull with the use of or reliance on any content, goods or services mentioned in this article.

Read disclaimer

Check Also

Joe Biden’s Trillion-Dollar Stimulus Bill Pushes Miami Mayor to Buy Bitcoin

Miami Mayor Francis Suarez has revealed that he gain bitcoin and ether right after the …

Leave a Reply

Your email address will not be published. Required fields are marked *